Skip to content

Looking to buy extra keys? Click here

3 October 2026

Half Cylinder Locks: What They Are and Where to Use Them

What a half euro cylinder is, where it is used, how to read the 10/35 size and how to measure and fit one.

Half euro cylinder lock fitted in a dark steel roller shutter

Updated November 2026. Written by the WD Locks team, the lock shop of Watchdog Locksmiths, 397-399 Greenford Road, Greenford UB6 8RF. Our Watchdog 3 Star ALPS locks are BSI Kitemark 3 Star TS 007 tested, and installation is available from DBS-checked Watchdog locksmiths.

Key takeaways

  • A half cylinder is a euro cylinder operated by a key from one side only.
  • It is common on garage doors, roller shutters, gates, key switches, access control systems, utility cupboards and some commercial doors.
  • 10/35 means a 10mm short inside and a 35mm key side. Always check your existing size.
  • A 3-star half cylinder gives you the same BSI Kitemark protection on doors that only need a key from one side.

Not every lock needs a keyhole on both sides. On many garage doors, shutters and key switches, only one side ever needs a key, and a half cylinder is the right part. This guide explains what a half cylinder is, where it is used and how to buy the right one.

What is a half cylinder lock?

A half cylinder is a euro cylinder that is operated from one side only. The other side is a short body with no keyhole. It still has a cam that turns when you use the key. Because it is shorter, it fits cases and switches where a full-length cylinder cannot.

Where are half cylinders used?

  • Garage doors and roller shutters.
  • Gates and outbuildings.
  • Key switches and access control systems.
  • Utility cupboards and cabinets.
  • Some commercial doors where key access is only needed from one side.

Understanding the size: 10/35

A 10/35 half cylinder has a 10mm short side, which sits on the inside of the fitting, and a 35mm key side, which is on the outside. Always check your existing cylinder size before ordering so that the lock sits correctly in the door or fitting.

How to measure a half cylinder

  1. Remove the fixing screw and pull the cylinder out.
  2. Measure from the centre of the fixing screw hole to the outside edge of the cylinder on the key side. For a 10/35 this is 35mm.
  3. Measure the short side the same way. For a 10/35 this is 10mm.
  4. Round to the nearest 5mm if needed and check it sits flush.

For the full process, see how to measure a euro cylinder lock.

The Watchdog 3 Star ALPS half cylinder 10/35

The Watchdog 3 Star ALPS half cylinder lock 10/35 is a BSI Kitemark 3 Star TS 007 anti-snap half cylinder, built for garage doors, roller shutters, key switches, access control systems and commercial doors.

Frequently asked questions

Is a half cylinder as secure as a full cylinder?

A half cylinder built to the same standard, such as a 3-star TS 007 half cylinder, offers the same type of protection on the key side.

Can I use a half cylinder on a front door?

Not usually. A front door normally needs a keyhole on both sides, or a thumb turn on the inside. A half cylinder has no keyhole on the inside.

What size half cylinder do I need?

Measure from the centre of the fixing screw to the key-side end and the short end. The 10/35 size is common on garage doors and shutters.

Can half cylinders be keyed alike?

Yes. Compatible Watchdog cylinders can be keyed alike. See our keyed alike guide.

Need a half cylinder?

See the Watchdog 3 Star ALPS half cylinder or contact us and we will help you choose the right lock and size.

Sources and further reading

Written by the Watchdog Locksmiths team. Questions about your door? Talk to an expert.

Buy more Watchdog locks and keys here.

Genuine Watchdog keys cut to your key number and 3 Star ALPS cylinders in every common size, dispatched the same day before 2pm.